Which electric underfloor heating should you choose for your bathroom?
Would you rather stand on a warm floor in the morning than on cold tiles? Then you are probably considering electric underfloor heating for the bathroom. Logical choice, but the question that comes next is less simple: which system suits your bathroom?
We get this question all the time, and the answer is never "this one product is best for everyone." It depends on your floor structure, how quickly you want heat and whether you are renovating or starting from scratch. To keep it manageable, we zoom in on two mats that we most often recommend for bathrooms: the Pro-mat Pro series 150 watts and the Pro-mat 200 watts. Both waterproof, both IP67 rated, both suitable for a damp room. The difference is in what they solve for you.
[products=badkamer_vloerverwarming_blog]
What requirements must electric underfloor heating in the bathroom meet?
A bathroom is not a living room. There is water on the floor, the humidity rises as soon as someone showers, and the floor structure is often already cramped due to existing pipes or a low door sill. An underfloor heating system that works well there must therefore at least be waterproof, take up little height and be able to reach temperature quickly. The latter is not equally important everywhere, but in a room where you often only stay for a short time, every minute of warm-up time counts. With these three points in mind, the choice between the two Pro-mat variants becomes a lot more concrete.
Pro-mat Pro series 150 watts: thin and useful for renovation
This mat is made for situations where space is at a premium. It is extra thin and simply goes with the tile adhesive, without having to calculate a separate layer. For a bathroom renovation where the door just fits over the new floor, or where you simply don't want to raise the floor structure, this is exactly what you need. With 150 watts per square meter, the floor heats up evenly. Not extremely fast, but comfortable and without cold spots. This is more than sufficient for a bathroom that you use in the morning and evening and where the heating can preheat for a while.
Would you like to get a little more return from this system? Add a 6 or 10 mm layer of insulation under the mat. This ensures that the heat sinks less to the subfloor and therefore rises more quickly, towards your feet. You will notice that difference on a moderately insulated ground floor or a floor above a crawl space. A practical application where this mat really proves itself: tile over tile. Leave existing tiles, place the thin mat on top, and put new tiles on top. No demolition work, no dust, no weeks without a bathroom. A warm floor at the end of the ride.
Pro-mat 200 watts: when speed is paramount
This mat is for people who do not want to leave the underfloor heating on all day, but want the bathroom to feel nice and warm within fifteen minutes. With 200 watts per square meter, the system responds noticeably faster than the 150 watt variant.
In practical terms, this means that you can program the thermostat to start 20 minutes before your alarm goes off, or just before you take a shower. No constant power demand, but a warm floor at the right time. This is a nice balance for households that consciously manage energy consumption but do not want to compromise on comfort.
Is electric underfloor heating allowed everywhere in the bathroom, including in the shower?
Technically yes. Both mats are IP67 rated and therefore waterproof enough to also be placed in the shower area. Yet this is a place where we would like to make a comment.
In the shower, the floor heats up automatically, simply by the warm water that washes over it. The underfloor heating adds relatively little comfort. What it can do: repeatedly getting wet and drying again accelerates the appearance of limescale. For that reason we usually recommend keeping the direct shower area free of electric underfloor heating. Elsewhere in the bathroom, where the floor dries again after a shower without water constantly falling on it, the system works optimally. Curious about the ideal temperature for electric underfloor heating in the bathroom? You can read that in a separate article.
Which mat suits you?
Are you still in doubt? This is the difference in practice. The Pro-mat Pro series 150 watts is suitable for you if the floor structure must be limited, you work tile over tile, or you just want an evenly warm floor without haste. Possibly supplemented with insulation if you want a little more heating speed. The Pro-mat 200 watt suits you if you mainly use the underfloor heating at fixed times and speed is more important than a slightly lower floor structure.
Questions about your situation?
Every bathroom is different, and sometimes the choice depends on details that you only see when you look at the floor structure or the floor plan. View the options with our selection aid or simply contact us. We are happy to think with you about which electric underfloor heating best suits your bathroom.