Menu
EUR
Nu 10% korting op het hele assortiment! Gebruik code: BLACK10 *Niet geldig op Magnum-producten
How long does it take for electric underfloor heating to warm up?

How long does it take for electric underfloor heating to warm up?

By: H.G. Voortman Comments: 0

One of the most frequently asked questions about electric underfloor heating is: how long does it take for the floor to warm up? The answer is less simple than many people think. In some situations, the floor feels pleasantly warm within 15 minutes. In other cases it may take more than an hour. The difference is almost always one thing: the insulation under the underfloor heating.

The importance of a good insulation layer

If you want your electric underfloor heating to heat up as quickly as possible, a good insulation layer is essential. By first installing an XPS Pro-board insulation plate, you prevent heat from flowing downwards. The heat is sent directly upwards, so that the floor reaches the right temperature much faster. With a tiled floor, you can even process the heating mat directly into the tile adhesive, after which you will often notice that the floor feels warm within about 15 minutes.

The most efficient structure looks like this: the XPS Pro-board insulation board at the bottom, the electric underfloor heating mat above that, then tile adhesive or leveling compound and tiles or a PVC floor as a finish.

Why is insulation so important?

Some homes have a concrete floor on sand or a cement screed with little to no insulation in the crawl space. If you place electric underfloor heating on this without an insulation plate, a lot of heat will be lost downwards. You then not only heat the floor you walk on, but also part of the structure underneath. The result is a longer heating time, higher energy consumption and less comfort — while this can largely be prevented with a simple insulation board.

XPS Pro board: warms up faster and uses less energy

The XPS Pro-board insulation board is available in two thicknesses. The 6 mm variant saves up to approximately 20% energy loss and ensures approximately 20% faster heating. It is ideal when the installation height is limited. The 10 mm variant goes a step further: up to 30% less energy loss and approximately 30% faster heating. For those who want to get maximum performance from electric underfloor heating, the 10 mm is the best choice within our range.

[products=xps_isolatieplaten]

The best structure for PVC floors

More people are choosing electric underfloor heating beneath vinyl flooring. For a fast response, we recommend bonding 10 mm XPS Pro-Board insulation boards to the cement screed with tile adhesive, placing Pro-Series electric heating mats on top, and covering the system with approximately 6 mm of levelling compound (3 mm above the cable). Finally, bond the vinyl flooring to the levelled surface. This construction limits downward heat loss and transfers heat quickly to the floor surface.

Electric underfloor heating under tiles

For bathrooms, the combination of an XPS Pro board with a tiled floor is often the fastest responding solution. Because the heating cable is located directly under the tile, heat is released almost immediately to the floor surface. As a result, the floor often feels comfortably warm within fifteen minutes.

Heat up even faster with 200 watts per m²

If you want to get the floor up to temperature even faster, our 200 watts per m² electric underfloor heating is an interesting choice. While standard systems have a capacity of 150 watts per m², a 200 watt system provides approximately 25% more heating capacity. This makes a noticeable difference, especially in rooms where you want to feel heat quickly, such as bathrooms, conservatories or well-insulated rooms with a tiled floor. In combination with an XPS Pro-board insulation plate, you get the most out of your installation.

How long does it really take?

On average you can assume the following heating times:

Situation Warm-up time
150 W/m² on XPS Pro board with tiles ± 20 to 30 minutes
150 W/m² on XPS Pro board with PVC ± 15 to 20 minutes
150 W/m² without insulation on concrete floor 45 to 90 minutes or longer

The exact time depends on the room, floor thickness, system power and ambient temperature.

Conclusion

How quickly electric underfloor heating heats up depends mainly on the substrate and the insulation. A system without an insulation plate on a cold concrete floor requires considerably more time than a well-insulated structure. If you want rapid heating and low energy consumption, the combination of a 10 mm XPS Pro board, the Pro-Series electric underfloor heating and a PVC or tile floor is the most efficient solution. The heat then ends up exactly where you want it: in your floor, not in the subsurface. Do you want to know which system best suits your situation? Use our calculation tool or request advice without obligation.


Comments (0)

There are no comments yet, be the first one to comment
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
Order for another €150,00 and receive free shipping
0
Compare
Start comparison

Leave a comment

Your email address will not be published
This product has been added to your cart